Max load weight :10000mm Cnc Deep Hole Drilling Machine Making An Deep Hole 1600mm
Product Feature
The base of machine tool is made of resin sand cast, which is twice qualitative treated. There are three main parts: base, column and entering sliding table. Imported ball screw and guide rail are installed in every part, and it runs by the high-precision Servo Motor.
The base includes operating platform, Servo Motor, lubricating system, protecting cover, etc. The operating platform moves along the direction of X axis horizontally.
The column includes Servo Motor, counterweighing, etc. The entering sliding table moves up and down along the direction of Y axis.
The sliding table includes main axis and its motor gears, Servo Motor, anti-hunting support for gun drill and its automatic regulating device, gun drill guide and chip conveyor, stabilizer of hydraulic system, etc. The gun drill moves along the direction of Z axis horizontally.
It is a special deep-hole drilling operating system, which is powerful, simple operating, stable and durable. Main advantages:
Multi - segments processing automatically: It will adjust the feed rate automatically according to the processing schedule.
Logical control processing: The processing situation is monitored and the processing specification will be adjusted automatically if any unusual.
Multiple operation. There are optional modes: man-machine dialogue mode, machine programming mode and remote transmission mode.
Processing Range
1. It used widely in plastic and rubber industry, hydraulic mechanism, automobile and tractor, generator and aviation industry for machining deep hole perforation;
2. Such as: Cooling hole, heating hole, valve, distributor, pump, steering shaft, spindle, heat-exchanger plate etc.
Specification
| Model |
TL1600 |
| Number of drilling spindle |
Uniaxial |
| Inner diameter of drilling |
2.5-40mm |
| Max depth of drilling |
1600mm |
| Size of working table |
1800*1100mm |
| X axis travel |
1600mm |
| Y axis travel |
1100mm |
| Z axis travel |
1650mm |
| Drilling cutting feed rate |
10-250mm |
| Max rotary speed of spindle |
7000rpm |
| Spindle motor |
(servo)7.5-11kw |
| Moving motor from right to left on work table |
servo 3.0kw |
| Moving motor from up to down on spindle |
servo 3.0 kw |
| Moving the motor from front to back on spindle |
servo 2kw |
| Pressure of cutting pressure pump |
80 kgf/cm² |
| Oil mass of oil pressure pump |
6-60 L/min |
| Capacity of cutting oil tank |
700 L |
| load capacity of working table |
10000kgs |
| machine net weight |
13000kgs |
| Machine power |
30kw |
Standard accessories
Taiwan spindle
Fanuc or Mistubishi controller
Spindle oil cooler + NSK Bearing
gundrill + precision guide sleeve and rubber guide
grinder machine
HIWIN linear way
Product Tags:
|
|
Resin Sand Cast Base CNC Deep Hole Drilling Machine , CNC Gun Drilling Machine Images
|
